This is a conversion cable to connect a PC and a general-purpose analog RGB cable (0.7V) from a display. D-sub15 display connector side: female, no screws [[Compatible Models]] Sharp X1/turbo DIN6 pin With a digital RGB output terminal (5V). [[Compatible Displays (Finding these is a hassle...)]] Mini D-sub 15-pin 3-row terminal (commonly called a VGA terminal) that supports a horizontal sync frequency of 15kHz. (400 lines are 24kHz) The RGB and sync frequency GND grounds are separated, but there are only wiring and resistors, no complex circuits. (Two of the nine wires are connected to each GND. 2 + 2 = 4 wires) Therefore, horizontal blanking issues are not supported. (Colors may appear different in some software.) Since the resistors are somewhat air-wired, the entire connection is fixed with a glue gun. (If a short circuit or disconnection occurs, it will probably be here first, and conversely, if you secure this part, it will probably be fine.) Please find a compatible combination of PC and display that suits your needs. Since there is no actual machine, intermediate inspection is performed to ensure that there are no wiring errors. Short version Shipping: Free Shipping: Yu-packet Post mini Shipping notification: The system's shipping date and time notification will serve as the shipping notification. Immediate shipment upon payment No need for greetings or payment notifications. Returns are possible, but the buyer is responsible for return shipping costs. The products I make are currently only listed on major sites and BOOTH. They have become popular and sell well, but I have found that the images are being used on fraudulent sites. Please be careful. #Sharp #Sharp #Mini #3row #D-sub15 #DIN6 #Analog