Thank you for viewing! This is a completed Tamiya Mini 4WD Ray Spear. It was created with a racing-inspired color scheme, mainly red, with camel yellow and gunmetal accents, and metal black. While it's a custom machine, the internal parts use plastic bearings, etc., to keep costs down. It's a stock class-compliant machine. It can also be used in B-MAX if you remove the teichin (lantern) system. Due to the modifications, the condition is considered "like new." It has been stored for display purposes. I put care into the work. I spent a lot of time painting the body. Also, I apologize, but I did spend money on parts and paint. I would appreciate it if you would consider this with understanding. Specifications Overview: * All parts are new Tamiya products (some stickers are aftermarket). * Body Construction: * Preparation, cleaning, and drying → Surfacer → Drying → * Camel Yellow → Drying, masking → * Bright Red → Drying, masking → * Gunmetal → Drying, assembly, sticker application → * Water-based clear coat (gloss) * Wing painted metallic black * \* Please understand that there may be minor scratches, slight paint bleeding, and sticker lifting from the manufacturing process. * Chassis: VZ Black * A Parts: Gray * Wheels: Carbon-mixed Y-spoke, through-hole processing * Tires: S Hard * FRP cross-section painted black ◎ Internal Parts: * Axle bearings, gear section plastic bearings * Fluorine-coated gear shafts * G Terminals * Reinforced pinion * Reinforced black shaft * Hollow propeller shaft * Light Dash ▫︎ Setting: ◎ Front: * Main: Carbon rear plate * Underplate: Straight FRP, MS FRP * Bottom countersunk processing, countersunk screws * Teichin unit (FRP arm): AR-type hemispherical * Mass damper: Slim long * Rollers: 13-13mm 2-stage low-friction plastic, 13mm rollers * Stabilizer: Yunomi (teacup) type ◎ Center: * AR FRP * Bottom countersunk processing, countersunk screws ◎ Rear: * Main: Straight FRP plate * Underplate: Brake FRP, Super X FRP for snag prevention * Bottom countersunk processing, countersunk screws * Rollers: 13-13mm low-friction plastic rollers, 13mm plastic rollers * Mass damper: Ball link \* Please apply grease when running. \* Although burrs have been removed, please handle with care. \* Please understand that changes to the specifications after purchase are not permitted.