24 Fret Guitar Neck - Overall Length: Approx. 62cm Thank you for looking. This is a neck for a mini guitar, shorter than a short-scale neck. Made in China. The paint on the headstock has peeled off, but I'm listing it as is because I somehow like the color. There is no clear coat on that part. You can use it as is, or you can remove the paint. The scale is about 560mm, so it's shorter than a short-scale. I don't know if it can be attached to things like ZO-3 or Photogenic mini guitars. The joint width is about 56mm. The position markers on the fretboard are dog or cat paw prints. The position markers on the side of the neck are regular dots. There are holes in the joint, but there are few signs of use. About 97% of the frets remain. I don't know about the truss rod. There is no nut. It looks similar to this, but the serial number is different: https://x.gd/LGmRo Will be shipped free of charge from the post office. There was no nut when I acquired it, but I found a nut that fits, so I will include it. However, the nut is a bonus. Whether it's the best fit will depend on your preference, so it will not be included in the price.