## Data Color: Blue IEM Connector: 2Pin (0.78mm, recessed compatible) Plug: 3.5mm 3-pole Total Length: 120cm Splitter Length: 42cm *Length may vary due to handmade nature. ## Description ~Unleash the performance of your IEMs!~ Utilizing military-grade silver-plated copper wire with a TFE coating. This conductor produces a sound rich in information with a straight presentation, and the highly efficient sound transmission of the coating makes it a remarkable material for IEM cables, offering a wealth of information, overall tightness, and a wide range from high to low frequencies. TFE coating is hard, so it's not ideally suited for IEM cables, but by using 28AWG wire and surrounding it with a highly elastic tube, the disadvantages of using military-grade wire in IEM cables are minimized, allowing you to gain the significant benefit of bringing out the performance of your IEMs. Copper-infused solder is used for the plug, and silver-infused solder is used for the IEM connector side, achieving a good balance that allows you to enjoy the richness of the mid-range and vocals of both male and female singers. Both companies that produced these solders have gone out of business, so they are no longer available. Regarding 2PIN, red is right, and black is left. The standard polarity is (+-) on the left side and (-+) on the right side when the grooved part is facing up. IEM cables are often used directly with DAPs, and the IEM side tends to wear out with repeated insertion and removal. Therefore, I believe it's important not to make the cable too visually striking and to ensure high resolution for long-term, reliable use. While the use of a highly efficient transmission coating has the drawback of cable stiffness, I hope you will consider this cable for its ability to deliver a wealth of audio information and bring out the fundamental performance of your IEMs. #IEM Cable #Recable #Portable Audio #2PIN(0.78mm) #3.5mm #Scriptone