For those looking for a guitar neck, I will be listing various necks in the future, so please follow me! You might find the neck you're looking for! Especially those who like reverse headstocks and large headstocks, please be sure to follow! New Stratocaster Flame Maple Guitar Neck 22F Roasted Rosewood Fretboard Tiger Stripe Stratocaster New, unused. These are the actual photos. Right-handed Stratocaster neck, roasted flame maple with a rosewood fretboard. Normal headstock. Round edge/ball edge fret specifications. As you can see in the photos, the fret edges are rounded, so you won't catch on the frets, making it easier to play. This is not the type where the frets are rounded after being hammered in, but rather the type where round edge frets are hammered in. The heel width is narrow, so it should be easy to install. The characteristic of this individual is the distinctive pattern and color of the fretboard, which is cool. I've looked at Fender, Fender Mexico, Mighty Mite, Chinese, etc., and this is a pretty good quality. The flame is very cool. It shimmers depending on the angle and how the light hits it. (I've tried to photograph it to show the tiger stripe as clearly as possible, but please understand that it is greatly affected by angle and light.) It should be relatively easy to install on Fender-style guitars. (There are individual differences in both necks and bodies, so I can't guarantee that it will be a perfect fit. Some processing or adjustment may be necessary, so please refrain from purchasing if you are not able to do so.) ・Material: Canadian Maple ・Fretboard: Rosewood Fretboard ・Regular Scale ・Heel width: Approximately 55mm ・Nut width: Approximately 42mm x 3mm ・Peg hole: Approximately 10mm ・Satin finish ・C-shape ・Fretboard 9.5R ・Neck thickness near the 1st fret: Approximately 21mm ・Neck thickness near the 12th fret: Approximately 23mm ・Neck thickness near the 22nd fret: Approximately 27-27.5mm ・Width: Approximately 2.7mm x Height: Approximately 1mm, Medium Jumbo size, Stainless steel ・Genuine nut with pre-cut grooves ・Truss rod wrench: 4mm ・Regarding forward and reverse bow → Generally straight ※Please assume that there may be some minor scratches and dirt as this is a wooden product. ※There may be some minor scratches, etc., due to storage and transportation that I may have overlooked, so please judge from the photos. Also, please refrain from purchasing if you are overly sensitive.