This is a Hamaya (ceremonial arrow) stand that allows you to mount a Hamaya on the wall at any angle. By gently bending the main body and passing the arrow through the two holes, the Hamaya is secured by the body's restoring force. It has a luxurious metallic gold finish. ＜Patent and Design Registration Pending＞ How to fix the main body to the wall: ① Push pins (2 included) When attaching to a plasterboard wall, use the two push pins to insert into the small holes in the main body and fix it to the wall (see attached image). ② Double-sided tape (1 included: temporary adhesive double-sided gel tape: manufactured by Yamada Kagaku) Suitable wall surfaces: Glass, tile, marble, acrylic, ABS resin, metal, wood Attach the double-sided tape, which leaves little residue, to the wide surface of the main body and stick it to the wall. * Please be careful as it may fall if the adhesive strength is weak depending on the wall type. ③ Wood screws (course thread) / nails When attaching to wooden parts such as pillars, insert wood screws etc. into the slightly larger holes in the main body and fix it to the wood. 【Contents】 　Main body: 1 piece, Material: PP 　Push pins: 2 　Double-sided adhesive gel tape 【Size】 　Maximum: 210mm x 100mm 　Hole diameter: 34mm 　Please refer to the image. 【Notes】 Regarding the metallic gold paint of this product: This product uses paint that is resistant to bending, so paint peeling is unlikely to occur. However, please be careful as the paint may peel if you bend it excessively when inserting the Hamaya. While resistant to paint peeling due to bending, the metallic gold paint is prone to scratches and fingerprints, and there may be some paint unevenness or small spots. Please understand. The back side is white, but some metallic gold spray may be attached. Also, to avoid the metallic gold paint from sticking to the wall, make sure that the metallic gold painted surface always faces outward and does not touch the wall. * Please refrain from price negotiations.