#Tamiya TT02 Parts - Various items are on sale. ↑ Click ↑ I've created stabilizers, essential for rally-spec cars. They reduce roll, increase ground contact, and prevent rollovers. Since there's no official setting for the TT-02, I made these myself. This is a stabilizer set for the Tamiya TT-02 with standard suspension arms. (Not compatible with S-arms due to different rod lengths.) Also, please use universal shafts. Parts other than the rods are from Tamiya. The piano wire for the rods is bent and then heat-treated (280°C for 10 minutes). The rod diameter is 1.5mm. The stabilizer holder is made of 2mm thick carbon. Since the thickness increases, 12mm screws (2mm longer) are included. Please refer to the video for installation. For setup, remove the dampers from the suspension and leave it free. Attach only the rods first. Adjust the rods to move smoothly. Then, connect to the suspension arms, and if one side lifts, the other side should also lift. The first photo shows a long damper stay with long dampers and a chassis handle. These are also on sale separately. RC Shop K