Microlon is a metal surface treatment agent that reduces friction and wear by coating the metal surface with a fluorine-based resin, maintaining the best condition. Microlon is not a lubricant, but a coating treatment for the metal surface. Therefore, the Microlon effect does not change even after oiling or degreasing after treatment. Originally invented in the United States in 1964 as an engine additive, it was adopted by a former Mini 4WD champion for bearing tuning. In addition, performance improvement can be expected by treating bearings for radio-controlled models, yo-yos, skateboards, and fishing reels with Microlon. The amount used for one treatment is about one drop, so even this amount can treat a considerable amount. ★Example of treatment method★ 1. Degrease the bearing well 2. Warm the bearing to about 60-70°C using a dryer or hot plate 3. Shake the container well to agitate the Microlon, drop one drop into the bearing, and immediately spin it to make it well-blended 4. Heat again until the Microlon evaporates 5. Repeat steps 2-4 about 2-5 times. In addition to this, there are methods such as dipping, each with its own advantages and disadvantages. Please refer to videos on YouTube that introduce Microlon and explain how to treat it. If the shields and retainers of your bearings use resin or rubber, raising the temperature excessively may cause deformation or deterioration. In this case, keep the heating temperature to about the temperature of a slightly hot bath and let it evaporate over time. Please try it out on this occasion! In addition to this, we are also selling shim sets, bearings, and chemicals. We can offer a discount on shipping for combined purchases, so please feel free to send us a message if you are interested! ★Noraneko Works Shim Sets, Bearings, Various Bearing Shim Sets ★Shimano Grease (single item and sets) ★Bored Grease, Various Oils ★Glitch Oil Various ★Hedgehog Studio Alchemy Oil Various ★IOS Factory Grease, Various Oils ★Other Smith Reel Grease, Microlon, Liquid Compound Sets, etc.