For sale: A set including a Kaldi 600g roaster (purchased in 2022) and a chaff collector. *The roaster itself is functional, but the chaff collector requires repair or is intended for parts. Usage frequency: 3 times a week, about 4 batches per session. Roasting data management is possible by connecting to a PC, allowing for highly reproducible roasting. 【About the Roaster】 Brand: Kaldi Type: Semi-hot air Maximum roasting capacity: 600g Drum: 3.4mm stainless steel drum With a rear punch plate and vortex vanes, the design enhances the hot air ratio, which is becoming mainstream in recent years, by sending high-temperature hot air generated by the heat shield installed between the burner and the drum from the rear of the drum into the interior. 【Specifications】 ・Motor rated voltage: DC24V 15W ・Power supply: DC24V 1A (built-in) ・Rotation speed: 60rpm ・Materials: Body - Stainless steel / Exterior - CR・Powder coating ・Size: 490(W)×240(D)×420(H) *Width including lever approx. 550mm ・Weight: Approx. 20kg ・Country of manufacture: Korea ・Thermometer: Center306 dual temperature (data logging compatible) 【Regarding the Usage Environment (Important)】 This product is not a household appliance, but rather equipment for本格 roasting. The following environment is required for use: ・Connection of an exhaust duct is required (can be purchased at a home center) ・Gas is used as the heat source ・Due to the weight of the main unit, a stove/gas stand with sufficient load capacity is required ・Cannot be used safely in an environment without ventilation equipment Please purchase after understanding the installation and usage conditions. 【Disassembly and Cleaning Status】 ・Motor and drum are separated (photo 5) ・Due to the structure of the drum and discharge surface, disassembly is very difficult, so we have prioritized preventing distortion and damage and have not performed forced disassembly. ・Therefore, the inside of the drum has not been completely cleaned. ・There is discoloration and slight scorching on the internal insulation wool due to use (no missing parts) photo 4 【About the Chaff Collector】 ・Water entered the motor during disassembly and cleaning, and it is currently not working. ・Stains from moisture and dirt on the top plate (photo 6) ・Fixed on only one side due to misaligned screw holes (photo 7) ・The removed screws are fixed to the main unit with tape to prevent loss. *Please consider this for repair or parts. 【Notes】 ・Sold as is ・Please check the condition in the photos ・Returns are not accepted due to insufficient installation environment ・Due to being a used item with a history of disassembly, no claims or returns are accepted.