【Product Name】 Tape LED DIY Interior Lights Set of 10 (+1 spare, included in case of damage during shipping) For TOMIX, Tomix, Micro Ace, White Color, N Gauge Model Railroad 【Description】 These interior lights use 12.5 cm tape LEDs and can be cut in 2.5 cm increments. They fit perfectly in the length of Shinkansen (bullet train) cars. These are made for N gauge vehicles with a spring-based mounting system. They can be installed in TOMIX and Micro Ace vehicles in the same way as genuine interior lights. They can also be installed in wider vehicles, but you may need to slightly extend the springs. 【Please Read Carefully】 ※The springs are handmade from 0.3mm copper wire. They will maintain their shape and elasticity if you don't apply excessive force, but they are less shape-retentive than commercially available springs, so please handle them with care. ※Please note that these cannot be installed in KATO vehicles or other vehicles with a copper plate mounting system. Also, these are general-purpose products, so we cannot guarantee installation in all vehicles. An instruction manual is included, so please refer to it. 【Troubleshooting, etc.】※Please check before rating the product. If the product is defective, of poor quality, or if you are not satisfied with the product, you can cancel the transaction and receive a full refund. Installation is at your own risk. Also, damage after installation is not eligible for a refund. 【Specifications】 Lights up in both forward and reverse directions Voltage: 12V Tape LED Length: 12.5 cm Spring: 0.3mm thick ※Handmade LED: White color