Screw-in Hit Points For when they come off or need to be replaced. Also applicable to the scissors I am selling here. There are two types of screw standards, and almost all domestic scissors with screw types fit these two types. In JIS standards, these are metric coarse thread screws, with two sizes: 2.5mm and 3.0mm. Since it's often difficult to know the size, I will basically send a mix of 5 of each. If you want 10 of either 2.5mm or 3mm, please comment. Size notation ・M2.6×P0.45 ・M3.0×P0.5 【How to Replace】 Since it's a screw type, you can easily replace it by turning the screw. In rare cases, they may be attached with adhesive, so be careful not to break the screw with pliers when replacing it. If the screw is difficult to insert during replacement, remove the transparent rubber before tightening the screw. A small-sized screwdriver is required for the screws. ※ Depending on the product, it may be necessary to adjust the height of the handle, and there are scissors with different standards where the screws do not fit. Please understand. 5 pieces are listed separately. If you want a large quantity, please comment. Up to 50 pieces are available. Shipping is not available on Mondays, which are regular holidays.