Serviced Singer Computer Sewing Machine SF-390 With foot controller and wide table (If you don't need the foot controller, we'll deduct 2,000 yen) Each part has been oiled, inspected, and maintained for comfortable use. It can easily sew through 10 layers of 11-ounce denim, and with the automatic thread tension, you can sew thin fabrics like organza beautifully, leaving it all to the machine! [Computerized Automatic Thread Tension] No need to adjust the thread tension for thick materials like denim, thin materials, or stretch fabrics, making it safe for beginners! You can sew beautifully with the optimal thread tension. [Automatic Thread Cutter] A function that automatically cuts the upper and lower threads by simply pressing the scissors button. [Presser Foot Pressure Adjustment] You can adjust the presser foot pressure to match the fabric, from thin to thick and stretch fabrics. [Easy-to-Use Horizontal Bobbin] The bobbin case is not needed for the lower thread, just insert the bobbin from above and hook the thread into the groove. Also, it's an easy-to-use type that eliminates the need to pull up the lower thread. [Automatic Needle Threader] Threading the needle is easy. (Please use needles size 11-16) [Free Arm] Convenient for hemming trousers and sewing cuffs. [LED Light] Equipped with an LED light that doesn't get hot even after long use and is energy-efficient. [Needle Down Position] The needle always stops in the down position at the end of sewing, so you can change the fabric's direction immediately after raising the presser foot. [Automatic Buttonhole] Automatically makes buttonholes according to the button set on the buttonhole foot. [Customizable Settings] You can adjust the stitch length and width, expanding the range of your sewing. [Automatic Bobbin Winding Stop] The bobbin winding automatically stops when full, preventing over-winding. [Safety Function] It won't operate if you forget to lower the presser foot lever and will alert you with a beep. ☆Accessories☆ Overedge foot, blind stitch foot, buttonhole foot (with underplate), zipper foot, satin stitch foot, leather foot, needle pack, 3 bobbins (1 in the machine), sewing machine brush, seam ripper, screwdriver, needle plate screwdriver, spool holder (large) (small), instruction manual copy, instruction DVD, hard case cover, wide table, foot controller, hard case cover *The large spool holder is set on the machine.