--------- Product Description ---------- This product is manufactured using an FDM 3D printer, so layer lines and surface roughness will inevitably remain due to its characteristics. Please understand that the quality is not comparable to industrial products, and only purchase if you accept this. (Material: PLA resin, Color: Matte Gray) This product is attached using bolts. Please continue to use the spacer from when you removed the air outlet. If you do not use the sensor box of this product, you can use it as a vent with the lid removed. Installation and wiring on the vehicle are at your own risk. ＜Compatible Vehicles＞ ・Hiace / Regius Ace 200 series Standard / Wide Type 1, Type 2, Type 3, Type 4, Type 5, Type 6, Type 7 ＜Included Items＞ ・Temperature controller panel ・M4 x 15mm stainless steel hex bolts x 2 ・M4 stainless steel hex nuts x 2 ・Stainless steel round washers x 4 ※ Products not listed as included are not enclosed. 【Please Read Carefully】 3D printed products are less strong than molded resin products, so please avoid rough handling. Applying excessive force in a single direction greatly increases the risk of damage. Also, the PLA material used for molding is derived from plant components and decomposes in the soil, so it has less environmental impact, but it is a heat-sensitive material. Avoid prolonged exposure to high temperatures or direct sunlight.