Kamaka Ukulele Pegs These are pegs for Kamaka ukuleles. They have transparent white buttons, rather than the ivory white buttons often found on existing Kamaka ukulele pegs. You could call them pearl white, perhaps? They have a pearlescent color (this is just my personal impression, so please understand). The shafts are silver. These are friction type (1:1 gear ratio) pegs. They are not the 4:1 gear ratio type that is often seen recently. Please be aware of this. The outer diameter of the bushings is listed as 8.0mm, but there may be an error of about 0.2mm. I believe that the same diameter bushings are used on Kamaka HF-1 and HF-2, so you should be able to install them without any modifications. Please check the peg holes of your ukulele carefully. I will include a 5th string as a bonus. The manufacturer is unknown, but I replaced it about 3 months ago, so it hasn't been played much. Please use it in case of emergency. Thank you for looking. Please purchase only if you are not concerned about the details. #KamakaUkulelePegs #HF1 #HF2 #FrictionPegs