【Birdhouse】Handmade Birdhouse This is a handmade birdhouse. (Product Description) 1. The material used is OSB plywood. 2. Since OSB plywood is considered to be weak against water (outdoor use), the exterior of the birdhouse is coated with two coats of water-based paint (maple color) for insect repellent, rot prevention, mold prevention, and water repellency, and then two coats of oil-based varnish. The reason for using OSB plywood is that I felt the natural wood grain of OSB plywood would blend in with the garden. 3. Two holes (8mm) for attaching strings are installed at the top and bottom of the birdhouse (photos 2, 3, and 4). 4. Four drainage holes are installed on the bottom of the birdhouse (photos 4 and 5). 5. A clasp is installed on the top lid (photos 6, 7, and 8). 6. Approximate size: back panel height approx. 30cm, width approx. 17cm, birdhouse depth approx. 15cm, birdhouse width approx. 15cm, height to the nest hole approx. 12cm. 7. Since this is a handmade item by an amateur, it is listed as "slightly scratched or dirty." 8. Please refrain from purchasing if you are looking for perfection. Please consider this if you understand. Two strings for installation will be included. #Birdhouse #Birdhouse #HandmadeBirdhouse #Handmade #WildBirds