# You can see all products from Sakura Miyabi Acrylic Boards ☆ ☘️ These are offcuts of acrylic boards from our processing plant. ☘️ They are new and unused, with the protective film still attached. ☘️ We will pack as many as we can into a dedicated box (within the weight limit). ☘️【1mm/1.5mm/2mm/Rarely 4mm】 【3mm】 【5mm/Rarely 8,10mm】 We have separated them into boxes for each thickness, so please let us know after purchase if you have any specific requests. If you have no specific requests, we will pack them in order of the most abundant sizes. ☘️ They are machine-cut, so the corners are right angles. ⚠️ These are small offcuts with a short side of approximately 6cm or less. The long side is 30cm or less. ⚠️ Offcuts of 1-2mm thick boards have a short side of approximately 10cm or less. ⚠️ As they are cut-off scraps, most of them have not had their edges processed. ⚠️ Occasionally, there may be some with cracks, chips, or slight processing, or with holes (only about 2 or 3 pieces at most). ⚠️ Due to weight restrictions, we will not use any special cushioning materials for packaging. We will simply put them directly into the box. ✅ For Nekopos 1kg, the amount that can be packed is small, so they will move around quite a bit in the box. ✅ For Yu-packet Post 2kg, we will pack as much as possible, which will be around 1.8kg. We have a lot of these, so please consult with us about shipping with other boxes. Thank you.