This is a lap rail set for the "Capsule Plarail" series of gashapon (capsule toy) Plarail. Collecting enough rails for a single lap from gashapon can be difficult, so I created this rail set using a 3D printer to allow for a basic layout. Of course, it can also be connected to official rails. Since there are more long rails than the official rails, stable running can be expected. An explanation of this product is available on Youtube. Please refer to it. https://www.youtube.com/watch?v=f9jCpSzg-7I Set Contents: 45-degree curved rail (convex-concave) x 6 45-degree curved rail (convex-convex) x 1 45-degree curved rail (concave-concave) x 1 4x straight rail x 1 2x straight rail x 2 Standard straight rail x 2 2/3 straight rail x 2 1/2 straight rail (convex-concave) x 2 1/2 straight rail (convex-convex) x 2 1/2 straight rail (convex-concave) x 2 1/3 straight rail x 2 Unlike official rails, these rails can only be used on one side. When creating layouts such as S-curves, please use rails with convex-convex or concave-concave joints, or use official rails. Due to the unique sleeper design, it may not be compatible with some diorama parts. If you have a request, different colored rails can also be prepared. ※ This product is a personal creation made with a 3D printer. Please be aware that due to manufacturing, there may be stripe patterns, color differences, and surface roughness. ※ PLA, a plant-based plastic, is used for the material. It is prone to deformation in high temperatures, so prolonged exposure to direct sunlight is not recommended. Please handle with care.