The product is a set of the acrylic plate shown in the second image and one punch tool. Upon arrival, please attach the acrylic plate and the seat using the included adhesive tape.
If the adhesive tape does not hold, please be sure to read the following usage instructions before use.
◾️Product Description◾️
⚫️Punch Tool (1 finished product)
Seat: 4 cm x 4 cm
Height: Approximately 8.0 cm
※May be 2.3mm shorter.
○ Circle diameter: 8 mm
⚫️3mm Acrylic Plate (as shown in the image)
※The acrylic plate is transparent.
A protective seal is attached, so please peel it off before use.
⚫️Bonus Adhesive Tape
※Approximately 8 cm long
◾️Features◾️
A convenient tool for cutting dies, stamping, etc.
When used in leathercraft, it can be used with a hand press machine to press onto the leather for stamping or punching.
When using with a drill chuck, the major axis of the circle is 8mm, so please use a 13mm chuck.
★Usage Notes (Images 6 and 7)
The smooth molded plate surface of the seat is where a metal cushion seal is attached to the punch tool to prevent scratching the surface of the punch tool (the item you press) that you purchased yourself.
If you press the deformed cutting die (③), it will get scratched.
② The flat cutting die is less likely to scratch the seat, but for large flat cutting dies, it is easier to use if the seat is made larger.
※When using the press, if you are pressing something larger than the seat, or if the cutting die has a design that deforms the seat, place an acrylic plate or iron plate in between (sandwich) and enlarge the seat.
★If you don't mind scratches on the seat, please refer to this information.
#Leathercraft
#DiamondChisel
#Stamping
#Punch
#DieCutting
#GenuineLeather
Type: Hardware/Connecting Parts
Uses: Leathercraft