This is a table for the Daihatsu Hijet Truck, Toyota Pixis Truck, and Subaru Sambar Truck (S500P, S510P). It can be used for all Hijet Trucks, including Standard, Jumbo, and Jumbo Extra. *Please be sure to check that the dashboard shape is the same as the photo. *Cannot be used on vehicles with only one air conditioning vent on the passenger side. Installation is easy, just insert it into the gap above the console box. Convenient for eating cup noodles or lunch boxes in the car. The grooves on the back are designed to increase stability when the table is installed and items are placed on it. I drove with it installed, and it didn't come off. The design allows it to be used in either the center (below the navigation) or the passenger seat area. In that case, rotate the table 180 degrees. The direction will be clear once you install it (it can only be installed in the correct direction). Made of acacia solid wood, it is very durable. The top and corners are rounded. It has an oil finish specifically for wood, making it water-resistant. Size: Width 260mm Depth 200mm Thickness 15mm (Total thickness 30mm) *Table only for sale. *Please note that the wood grain and color will vary due to the use of natural wood. *Due to being handmade, there may be unevenness or errors in the finish. *The load capacity was tested with a 2-liter plastic bottle, and there were no problems. Please be careful as items heavier than that may be damaged. #Extra #Jumbo #HijetTruck #Hijet #Daihatsu #S510P #S500P #Vanlife #Vanlifer #Camp #Camper #CampingCar #KeiCamp #CarCamping #DIY #Homemade #LightCargo #Toyota #PixisTruck #Subaru #SambarTruck #Camp #CarCamping #diy #Handmade #Table #SoloCamp #InCarDining #FrontTable #Agetora #KeiTruck