☆NEW Item Release Commemoration Campaign☆ Limited-time sale price!! ☆New Jimny Nomad☆ ★Further Evolution★ Shortened to the limit for a completely clear view! ☆New Gray Color☆ JC74W Blends in with the rearview mirror and interior colors♪ Jimny Nomad JC74W Rearview Mirror Short Stay 32mm Upward This part dramatically improves the narrow forward visibility, which is a drawback of the Jimny. By raising the rearview mirror by 32mm, the field of view widens, providing a sense of openness and safety♪ Also, the mirror becomes less noticeable from the outside, resulting in a smart style♪ You can use the original mirror as is just by replacing the stay. JC74W Nomad Exclusive ※Made with high-quality ABS filament that is resistant to heat and impact using a 3D printer to allow use even in hot car interiors in summer. 【How to Replace】 ① Remove the cover at the base of the mirror with an interior panel remover or clip remover so as not to scratch the interior. ② Remove the two screws at the base of the original stay with a size 3 Phillips screwdriver (if you only have a size 2, press the screwdriver firmly and be careful not to strip the screw heads). ③ After loosening the screw in the hole on the back of the mirror, hold the mirror part and the original stay firmly and pull them out. (If it doesn't come out, warm the connection between the mirror and the stay with a hairdryer, etc., and it will be easier to pull out) ④ Connect the short stay to the mirror. (If it is difficult to insert, warm the area around the mirror hole with a hairdryer, etc., and it will be easier to insert) ⑤ Securely fix the stay with the two screws. ⑥ Close the screw in the mirror hole. (If it is loose, tighten the screw firmly and adjust) ⑦ Put the cover back on and adjust to a position that is easy to see. ※Please be careful not to get injured during the work. #Jimny #Nomad #JC74 #RearviewMirror #Short #Stay #JIMNY