# Low-Temperature Solder Stock Page ◆ Product Description ◆ ○ Homemade Low-Temperature Solder, No Rosin ○ High-Purity 99% Bismuth, Tin, Lead Alloy. ○ Thin and Easy to Use! Perfect for removing small electronic components! ○ 10g is the perfect amount for those who want to use just a little. 30g and 100g are for those who want to use a lot, such as for repairs. ・ Melting point around 97 degrees Celsius ・ Length: Approximately 10cm - 15cm ・ Weight: Approximately 3.5 - 5g per piece ・ Diameter: Approximately 2mm, cylindrical ※ There are variations in length and weight. ◆ How to Use ◆ ○ Apply solder to cover the legs of the board components and heat evenly to remove them. Remaining solder can be removed with flux and desoldering braid. ◆ Examples of Board Component Removal ◆ ・ USB connectors ・ Controller analog stick boards, sensors ・ Mouse microswitches ・ Potentiometers You can also use it to remove multi-pin IC components and other components. ※ One solder stick (approx. 5g) can remove 2-4 of the above components. ◆ Caution ◆ ○ The photo shows the solder after it has been melted in hot water and formed into droplets. It has not been melted by contact with a hot iron plate. ○ Lead, which is used in common eutectic solder to lower the melting point, is included. ※ Mercury and cadmium are not included. Please handle with care. ○ Since this transaction does not allow you to confirm the actual product condition, please carefully review the images and description before making a purchase. ◆ Shipping Method ◆ ○ Yu-Packet Post ○ We will ship within the shipping period (1-2 days), but please understand that there may be delays due to work. ps4 ps5 pc switch xbox USB computer mouse joystick analog junk repair electronic components solder D'Arsonval alloy lead bismuth