This is a complete upgrade kit to convert an Anycubic Mega Zero 2.0 to a direct drive extruder and enable high-temperature printing. I used this setup myself, but had to replace the mainboard due to a failure, so I've put all the custom parts I was using into this kit. I was able to print strong, high-quality prints with stable high temperatures. **Features:** * Upgrade kit for converting an Anycubic Mega Zero to a direct drive extruder. * Extruder is pre-assembled, ready to use after wiring. * All-metal construction with a bimetal heat break and copper heat end. * 24V / 50W high-power heater. * PTFE tube is not exposed to high temperatures. * Includes cables for console relocation. * Configuration tested and confirmed to work on a real machine. **Kit Contents:** * Direct drive extruder * Custom heatsink * Bimetal heat break * Copper heat end * 24V / 50W heater * Thermistor *These items are shipped as a single unit.* * 24V cooling fan (for the back of the mainboard, can also be used for the main fan if you can solder) * Various nozzles * 0.2 / 0.4 / 0.6 / 0.8 (brass) * 0.4 stainless steel nozzle * Nozzle cleaning wire brush * Thermal conductive silicone grease (opened, about half remaining) * Stepper motor extension cable * Z-axis and Y-axis switch custom long cables * 24V long cable * **Bonus:** * Direct drive PTFE replacement tube (approx. 40mm) * Used silicone sock (last one) **Compatibility and Specifications:** * Designed for Anycubic Mega Zero 2.0. * Has been used successfully with nozzle temperatures exceeding 260°C. * While the hardware supports high temperatures, the actual maximum temperature depends on the mainboard and firmware settings. **Notes:** * This is a used and custom-built kit, so there may be signs of wear and tear. * This product is an upgrade parts set (not a complete printer). * No installation support or operational guarantee is provided. Installation is at your own risk. **One Point:** * This product is intended for those familiar with the configuration and who enjoy modifying 3D printers.