The images are samples, and there may be individual differences in the paint condition. If the device cannot set the moment, it may cause chattering and may not be controlled properly. ex. Patch sending on BOSS GT1000core. The photos are examples, and the color, scratches, etc. may differ from the actual product. BOSS RC series cannot be used because they are normally closed. Ultra-compact left/right switchable soft-type momentary, passive, unlatch foot switch, normally open. Can be used as a substitute for BOSS FS-7, FS-6, FS5-U, but may not function as expected depending on the device. Although it is brand new and unused, please understand that it is handmade, so there may be distortions in the hole processing, uneven paint, chips, scratches, and marking marks. The image is a sample, and the paint unevenness of the actual product may differ. The paint will crack due to aging. This product requires a certain amount of knowledge to use, so please consider it as basically non-supported. We will check the operation before shipping, but if any defects occur, including initial defects, Due to shipping costs, we ask the winning bidder to adjust using a tester or soldering iron. Please note that the winning bidder will be responsible for all return and repair shipping costs, including initial defects, including round trip and re-shipment. This product has the above specifications, so please check if it can be used by the winning bidder. We will tell you about products with a proven track record, but please consider it as a reference only, as the manufacturer's specifications may change. Please refer to the photos for dimensions, etc. The paint has a protective film, but it is not baked, so it is vulnerable to scratches. Also, because it is self-painted, there may be uneven paint, lumps, and chips. You can use it as a momentary switch by connecting a TRS cable to the stereo jack. Because it is passive, no power is required. The foot switch is a soft type that supports rapid-fire use, such as when using a tap switch. How about using it as an expansion switch for Boss ES-8, ES-5, MS-3, GT-1000, GT-100, GT-1, VE-500, KEMPER REMOTE, etc.? The toggle switch on the right side towards the back is the switch left/right switch. You can switch the switch after installing it on the board (left and right when placed horizontally, up and down when placed vertically).