Made by Mitsubishi Chemical TENSEI Pro Orange 1K 50R This is a carbon shaft adjusted for fairway woods. This is a high-performance product that I adjusted for my own use. Although it's a flex R, it's originally a shaft with a high frequency, and because the frequency has been adjusted, it's effectively as stiff as an S. It's about the same as a 5S or 6S. Driver shaft weight is in the 40g range. It should suit people whose iron shaft weight is in the 70g to 90g range. Also, because spine alignment has been performed, the shaft print is not facing forward, but if you align the grip logo to the front, the position of the shaft spine will be where it was adjusted. The spine adjustment method is weight insertion, and with this insertion method, the head speed increases, the shaft is less likely to wobble, and the head feels like it runs well. When it was a club, the length was 42.625 inches when a glued-in head was attached (60° method). Please check the actual length in the second photo. The grip is: Elite Y360SH MB, no backline Approximately 50g / 60 caliber This is a high-performance grip that I use on all clubs except the putter. Because it's a soft grip, it wears out easily, so there are areas where the pattern is worn and the surface is slightly rough, but overall, it's in relatively good condition. The shaft itself is also relatively clean, I think. The tip has been carefully protected by the craftsman who performed the work. This shaft and the attached grip are definitely genuine. No returns or exchanges. Shipping is included, and because it's a long item, shipping is not cheap, and fees will also be deducted, so the price cannot be lowered any further, but If you purchase it at the same time as other shafts I have listed, please comment in advance, From the second item onwards, I will discount 1000 yen per item, and I will create a dedicated listing as one combined item. Please take advantage of this.