SUMI Guitar Parts offers high-quality products that "meet a certain level of quality," drawing on experience working at musical instrument stores and guitar construction & repair. This is a bushing to fix the bridge (preventing it from moving back and forth) for Jazzmaster, Jaguar, Mustang, and other guitars. "1 set (2 bushings)" The sizes are: bridge post side diameter 6.5mm, anchor side diameter 8mm, flange diameter 13mm, and flange thickness 1.5mm. Notes: Some guitars may fit these bushings perfectly, while others may not fit quite right (too tight or too loose). If they don't fit, please try the following: If too tight: ・Apply lubricant to the bushing and bridge post, etc. If too loose: ・Wrap masking tape around the bridge post, etc. *We cannot be responsible for installation issues due to the guitar's own precision (individual differences). For example, on guitars where there is a large discrepancy between the bridge hole on the pickguard side and the bridge hole position on the guitar body side, the bushing flange may interfere with the pickguard and not install properly (it may be possible to install it by shaving the flange). *Please be sure to check the dimensions of your guitar's bridge carefully before purchasing. Shipping is free and will be via Yu-Packet (delivery to your mailbox with tracking service) only. *We cannot accept requests for other shipping methods without tracking service to prevent any trouble for both parties. #Jaguar #mustang #jazzmaster