This is a stand for 1/6 scale dolls. The base has a black cat-foot design. The fourth photo shows the set contents. *Unlike the previously sold item, the rod part is made of metal instead of acrylic.* The width of the base is 11cm. The stand can be extended as shown in the photo. It can be adjusted within the range of 9.5 to 16.5 cm. The base is 1.5cm thick, so it will be longer if the doll is posed without its feet on the base. The acrylic plate on the base will be delivered with a protective sheet attached, so please peel it off as needed. *The third photo shows the protective sheet removed.* The protective sheet may have been reapplied for inspection, and the bag may have been opened. Please understand this. The rod that is inserted into the base is quite tight, but it can be inserted by turning it. *It is not a type that is inserted all the way in, so you do not need to insert it deeply.* If it still doesn't fit, you can sand the insertion part of the stand rod little by little to make it easier to insert. Of course, it can be used for figures other than dolls. If there is stock remaining, please contact us if you need multiple items.