Cartridge Spacer, Dry Carbon, 2.0mm, 2 Pieces, Custom Made SHURE M97 DENON DL103 AT33 Ortfon Kontrapunkt DECCA MC20/30 This is a custom-made, made-to-order product manufactured using a high-precision machining center at a high-end audio shop in Europe and the US. It was machined from CFRP dry carbon, which is also used in the space industry, using a high-precision machining center. It maintains 5 times the tensile strength of "iron" and 25 times the vibration resistance of "granite," moderately tightening the muddiness in the mid-low frequencies, and is expected to improve S/N ratio and reduce micro-vibrations and electrical noise. It reproduces musical signals that were buried in unwanted resonance, and is the optimal material for reproducing a smooth sound quality with improved detail and S/N ratio, as well as a clear sound image and a three-dimensional and wide sound field. If you like, you can further improve the sound by sanding the dry carbon surface with fine sandpaper of about #800 grit to remove the epoxy layer. ・Condition: Unused ・Specifications: 3K / Autoclave molding ・Quantity: Set of 2 / 2.0mm ・Weave: Plain weave ・Surface finish: Matte finish on both sides ・Size: Contact surface approx. 24 x 18mm ・Weight (approx.): 2.0mm 1.3g ・Compatible models: SHURE M97 series, DECCA, Jubilee, DENON DL103 series, CADNEZA, Audio-technica AT33 series, Ortfon Kontrapunkt, and many other domestic and foreign models. ※Excluding Ortfon SPU/Concorde series and EMT TSD series, which are directly attached to the tonearm. ※Please note that fine deburring has not been performed. ※Compatible models are for reference only and do not guarantee compatibility. Depending on the situation, slight adjustments or processing may be required. Regarding the condition of the product, please note the following points: - Metal parts may show slight signs of oxidation, scratches, scuffs, or dents. - For products that require assembly or installation, adjustments such as processing may be necessary depending on the situation.