IMAGENICS Distributor Power-on confirmed. Although the functionality of other features has not been confirmed, it was working without problems until recently. Additionally, a self-printed copy of the instruction manual from the manufacturer's website will be included. DA-1441 1-input 4-output video and audio (stereo, unbalanced) distributor (cable compensation circuit built-in) Equivalent to 41,800 yen The contents are as shown in the photos. Slight scratches on the top panel. Equipped with cable compensation function. NTSC video signal compatible distributor. The DA-144 is a distributor that outputs one video signal and two-channel (stereo) audio signals to four outputs. Both video and audio have input through-out terminals, making expansion very easy. By switching the selection switch on the front panel, the video signal level and frequency characteristics can be varied. Similarly, the audio signal level can be varied for each channel. 1-input 4-output video and audio distributor. Built-in cable compensation function, allowing for approximately 150 m of cable extension (when using 5CFB). (Approximately 70 m with 3C2V, or approximately 100 m with 3CFB or 5C2V) Both video and audio have FIX/ADJ switches, making it easy to use as a standard distributor (FIX) or for cable compensation (ADJ). (All settings and adjustments are consolidated on the front panel.) The cable compensation amount can be adjusted variably, allowing for adjustment according to the cable length and cable type. The audio signal is unbalanced stereo (2ch) specification. Both video and audio have through-out terminals, making it easy to build a system for preview confirmation or expansion. (Video connector BNC has 75 Ω termination auto-switching) EIA 19-inch rack mount 1U half-width size. (Rack mount bracket MK-100 sold separately) VCCI-A (Class A Information Technology Equipment) #IMAGENICS #イメージニクス #ディストリビューター #DA #1441 #映像分配器 #音声分配器 #ケーブル補償 #NTSC