♦︎ "Pochi's Wheelchair" - Lightweight aluminum dog wheelchair with adjustable harness. It's a 4-wheel type. A chin rest was custom-made by another vendor. ♦︎ It's very light, and even with quite weak legs, my dog walked around with ease and seemed to enjoy it. It was also good for feeding, as I could feed him while he stood. It was used indoors, so there isn't any major damage, but there are some minor scratches. ♦︎ The wheelchair was used for about 4 months, but it was used every day. - Type: Dog wheelchair, 4-wheel - Material: Aluminum frame - Adjustment: Height adjustable with Velcro - Accessories: Leash, rear leg support tape The chin rest is removable. ♦︎ Although it has been washed, please understand that this is a used item and there may be overlooked minor scratches and dirt. Please refrain from purchasing if you are overly concerned about these details. Please check the condition in the photos. ♦︎ Please refer to the photos for the wheelchair size. The leg height can be adjusted to some extent with the belts. Small dog (a very small Shih Tzu) Ordered when the dog weighed 2.8 kg. Please forgive any errors due to amateur measurements. On Pochi's Wheelchair's website, you can see how to measure the size for ordering. The following measurements were taken for my dog when I ordered the wheelchair, so please use them as a reference. 1. Length from basic line A to basic line B (From the front leg joint to the rear leg joint) (This is the length of the frame) 20 cm 2. Height from basic line C to the floor. Height from the center of the pipe to the floor. (Height from the rear leg joint to the floor) (This is the rear height of the wheelchair) 22 cm 6. Width of the thickest part of the body (The widest part when viewed from directly above) (This is the width of the wheelchair) 12 cm I understand that those viewing this are likely in a hurry, so I will ship within 24 hours.