◆ Product Contents ◆ 【KONAMI PC Engine mini / 8bitdo】 PC Engine Mini Wireless Controller ＜Included Accessories＞ Wireless USB Receiver USB Cable Instruction Manual (English/Chinese) ＜Compatibility＞ ・PC Engine mini ・PC Engine CoreGrafx mini ・PC Engine TurboGrafx-16 mini ・Switch ＜How to Use＞ 1. Insert the receiver into the pad terminal of the main unit. The blue light will blink once per cycle. For Switch, it will blink 4 times. 2. Press the home button on the upper center of the controller to pair. 3. When the connection is successful, the blue lights on both the controller and the receiver will illuminate. ＊ The Switch system version must be 3.0.0 or higher. ＜Rapid Fire Settings＞ Press and hold the Select + I (down) + II (down) buttons simultaneously. The blue LED at the top will blink. 1 time = 8 shots/ 2 times = 15 shots/ 3 times = 20 shots ＜Charging Method＞ Connect the controller to the main unit (or a separately sold adapter, etc.) with the included USB cable. The red light will illuminate, and charging will begin. A 1-2 hour charge allows for up to 18 hours of play. ＊ If you cannot charge when connected to the Switch, please try the following: "Settings" → "Controller and Sensors" → "Pro Controller Wired Communication" → Turn "On". ◆ Product Condition ◆ New Due to being an imported product, there may be some dents on the corners of the outer box, but please understand. Regarding other details, please confirm and judge based on the photos, or please inquire via comments. ◆ Shipping ◆ ＜Shipping Method＞ Yu-Yu Mercari Delivery Yu-Packet Plus ＜Days Until Shipping＞ 1-2 days #RetroGame 25.12