This is a 3D-printed lunchbox-style body for the Turbo Racing 1:76 off-road type C81. The scale is made to match the chassis, so it differs from the actual vehicle. The item for sale is the unpainted body only. (Photos 4, 6, 7, 8) The buyer is responsible for priming and painting. The lights attached to the roof of the original product can be removed and attached to this body. (To remove the lights, remove the red adhesive from the connector of the wiring inserted into the circuit board, and the connector will come out.) The tires will interfere when the steering is turned to the maximum, so please adjust by trimming as needed. To attach the body, insert the front hooks first, then snap in the rear hooks. To remove it, push the front hooks towards the rear to detach them, and then remove the rear hooks. It may fit surprisingly tightly, so adjust the amount of engagement of the hooks by trimming. This is a product of a 3D printer and was made by an amateur as a hobby. Please understand that processing is required for installation. Type: Radio Control Car