Nitrocellulose Lacquer Touch-Up Paint - Small Bottle This small bottle is convenient for touch-up work when the paint on your guitar is chipped or scratched. Contents: Approximately 10ml Instructions: ※ Be sure to apply in several coats. ※ Allow to dry for at least 3 hours after each application. 1: Remove dirt, moisture, and oil from the damaged area. 2: Apply a small amount of lacquer to the recessed area of the damage, avoiding a thick coat. 3: After drying for several hours, apply another coat of paint. 4: Repeat until the recessed area is level. Be careful not to apply too much paint. It is recommended to apply one coat per day over several days. If you want to perform a full polishing after applying the paint: 1: After completely drying, wet sand with 1,000 grit, 1,500 grit, and 2,000 grit sandpaper. 2: Polish with compound, etc. ※ Please perform the work at your own risk. Shipping included