~Handmade~ Polymer Clay Cutter *Horse Dala Horse Outline 30mm* Color: Random This is a polymer clay cutter made using PLA filament. It's an outline design of the Dala horse (Dalarna horse), a Swedish traditional craft considered a symbol of happiness and prosperity. It is the 【30mm】 size out of 【10mm/15mm/20mm/25mm/30mm】. Perfect for 2026, the Year of the Horse.*˖⋆ With a 0.4mm edge for clean cuts, and smooth processing after cutting and baking.*˖⋆ A rounded base that is gentle on fingers.*˖⋆ Size: Approximately at the largest part Design part 30mm Height 15mm Color: Random · · • • • ✤ • • • · ·· · • • • ✤ • • • · ·· · • • • ✤ • • • · ·· · • • • ✤ • • • · · PLA filament is a material developed based on plant-derived PLA resin - mainly a plant-derived biodegradable bioplastic made from natural materials such as corn, potatoes, and tapioca. This product uses high-purity, high-strength PLA/PLA+ filament.*˖⋆ ☆3D printing builds up by layering melted filament - we create it with settings that minimize layer lines as much as possible, but please understand that there may be some areas where there are shifts, burrs, layer lines, and stringing. ☆When using, especially cutters with fine designs, apply cornstarch or similar to the cutter when cutting, or remove the shape by pressing and removing it a few times little by little instead of all at once, making it less likely to stick and easier to remove. ☆Due to the nature of the product, clay may enter the layers. Please wipe it off using a soft brush or cloth without applying force. ☆Although it is a strong and tough material, please be careful as excessive force, especially from the horizontal direction of the layers, may lead to damage. ☆PLA filament is generally weak to heat and softens even at low temperatures of around 60°C, so please be careful about the temperature when washing - a dishwasher cannot be used. #akikaClayCutter