# You can see all products from Sakura Miyabi Acrylic Boards ☆ ⚠️ As of November 6th, we cannot secure 2kg of a single type, so even if you specify the thickness, other materials will be mixed in. If you have a specific request, we will prioritize it. ☘️ These are scraps of acrylic boards from our processing factory. ☘️ They are new, unused items with protective film attached. ☘️ We will pack as much as possible into a dedicated box (within the weight limit). ☘️ 【1mm/1.5mm/2mm/Rarely 4mm】 【3mm】 【5mm/Rarely 8,10mm】 We have separated them into boxes for each thickness, so if you have a preference, please let us know after purchase. If you have no specific request, we will include the most abundant items first. ☘️ They are machine-cut, so the right angles are accurate. ⚠️ The short side is approximately 6cm or less for small scraps. The long side is 30cm or less. ⚠️ For 1-2mm thick boards, the short side is approximately 10cm or less. ⚠️ Because they are cut scraps, most of them have not had their edges processed. ⚠️ Occasionally, there may be some with cracks, chips, or slight processing, or with holes (only 2 or 3 pieces at most). ⚠️ Due to weight restrictions, we will not use any special cushioning materials for packaging. We will simply put them directly into the box. ✅ With Nekopos 1kg, the amount that can be packed is small, so the contents will move around quite a bit in the box. ✅ With Yu-packet Post 2kg, we can pack as much as possible, resulting in approximately 1.8kg. We have a large quantity, so please consult with us about shipping with other box sizes. Thank you.