Thank you for viewing. This is a listing for two finished bassoon reeds. ・Reed Dimensions Blade: Approximately 28mm Tube: Approximately 30mm Total Length: Approximately 58mm The shaper used is Rieger No. 1a (tip width 15.50mm). ※ Rieger No. 1a is an orthodox type of shaper that combines a unified tone with a rich resonance. ・Materials French Neuranter (Material origin: France) It has a slightly bright, flexible tone with a lot of vibration. The hardness is selected and used from 13 to 18 (slightly hard to slightly soft) on the Reeds'n Stuff hardness meter. To minimize changes after finishing, it takes about two months from assembly to finishing. During finishing, the reeds are carved so that the p articulation responds without problems, the balance is good from low to high notes, and a wide range from p to f can be produced. The reeds are finished so that the tone remains vibrant even when playing f, so they are mainly suitable for intermediate to advanced players, such as: ・Those who want to blow a little harder ・Those with a large lung capacity ・Those who like reeds with resistance ※ Since the reeds have been test-played during finishing, they are listed as "Like New". #Bassoon #Bassoon