ULANZI FALCAM F38 Click Release Kit, brand new and unopened. Features are as follows: 【One-Touch Attachment and Detachment】The Ulanzi F38 quick release saves time when attaching and detaching equipment, which secondarily increases opportunities to utilize your shooting equipment. By attaching the plate to your camera, you can attach and detach with one touch; simply slide the plate in and it automatically locks. You can quickly switch between multiple cameras on the same equipment, or quickly switch a camera between multiple pieces of equipment, which is very convenient and saves time. 【Improved Secondary Lock Structure】Compared to the conventional lock method of pulling out a knob, the new structure only requires sliding to lock twice, making operation more convenient. The lock function reduces the problem of the button being difficult to pull. The board automatically locks when slid in, and the second lock and unlock can be easily done by sliding the side button. Especially in overhead shooting, the safety of the camera during shooting is increased. Note: To ensure secure locking, when using the camera, the camera lens must be kept in the same direction as the F38 button, and you must avoid pressing the top bar structure with the center in front. 【Wide Compatibility】There are 4 1/4'' screws and 1 3/8'' screw on the bottom of the quick release plate. Compatible with F38 adapters, F50/F22 quick releases, universal interfaces, 1/4 alloy positioning devices, and dual-thread equipment. The plate has four holes for Maglink shoulder straps. Note: The F38 quick release base cannot be used with quick release plates other than F38. 【Arca-Swiss Compatible】Both the quick release plate and the quick release clamp come with Arca-Swiss 38mm standards, and can be set on Arca-Swiss compatible head parts (clamps). The square plate can be freely attached in four directions, eliminating the need to specify the camera's position, and allowing for free adjustment of the mounting direction.