Jumper T14 2.4GHz 1W ELRS Mode 2 and RadioMaster ER4 2.4GHz ELRS Receiver 4CH PWM receiver set. This is a set of a transmitter and a 4CH receiver, purchased in August 2024. It has been stored without use since the beginning of this year. Jumper T14 2.4GHz ELRS VS-M CNC Hall Sensor Gimbal 2.42 inch OLED Screen EdgeTX Mode 2 CNC machined stick HALL sensor, with technical compliance mark Includes RadioMaster ER4 2.4GHz ELRS receiver 4CH PWM receiver. Binding has been performed once and operation has been confirmed, please perform the binding operation again. Transmitter Radio Controller for FPV RC Racing Drone There are no noticeable scratches, but as it is a used item, please refrain from purchasing if you are concerned about minor details. This is a set of a Jumper T14 2.4GHz 1W ELRS transmitter (Mode 2) and a RadioMaster ER4 2.4GHz ELRS 4ch PWM receiver. You can use it immediately upon arrival. ✅ Set Contents Jumper T14 Transmitter (Mode 2, 2.4GHz, Max 1W output, ELRS compatible) RadioMaster ER4 Receiver (PWM output 4ch, ELRS protocol compatible) ✅ Features Adopts the latest ELRS protocol → Supports high-speed response and long-distance communication Maximum 1W output for stable radio wave range Mode 2 specification (throttle on the left, common in Japan) ER4 receiver has PWM output, so it can be connected directly to conventional servos and ESCs Can be used immediately after purchase ✅ Condition Operation confirmed Both the transmitter and receiver have no major scratches or defects Can be used after binding ✅ Notes Some knowledge is required for use The transmitter can be charged with a Type-C USB cable Type...Radio control The items to be delivered are shown in the photos. Thank you.