Double blade humbucker using Alnico 2 magnets, featuring natural sustain and warmth, 4-conductor, fiber plate specification. This is an outlet pickup purchased for maintenance. I'm selling it because I have extras. ※The images are samples. The color and appearance of the cable may vary. If the cable sheath is torn, it may be protected with heat shrink tubing, so please be aware of this. Although it is unused, it is an outlet item, and may have scratches, dents, rust, chips, peeling, paint lifting, uneven finish, etc., due to transportation, storage, or manufacturing. Please do not purchase if you are looking for a pristine item. I find it useful because it's inexpensive and works reasonably well. The resistance value varies depending on the lot, so please inquire if you have specific requirements. There will always be some error. Screws and springs are included. ※Please install pickups and other components at your own risk, as it is considered a modification. We do not provide after-sales support for wiring. Wiring diagrams and boxes are not included. Regarding the four-conductor cable, the cold wire is connected to the ground, and the tap wires are connected to each other, with the single wire being the hot wire. Sometimes they are connected in parallel, so we check the phase and match it, but if it's different or if you're combining it with other pickups, please adjust the phase before using. Due to being an imported product, the purchase price and individual specifications will vary depending on the time of acquisition, so the images are samples, and the exact same item will not be delivered, and the price will also fluctuate. Please do not purchase if you are concerned about minor details such as "it used to be like this," and we will not accept returns for minor issues unless the item is unusable. The color of the cable, cord, and other parts will change from time to time. If the length is insufficient, please add to it. Please ask questions beforehand and make sure you understand the product before purchasing regarding points such as whether the pole pieces protrude from the back, their length, etc. Some adjustable pole pieces are not threaded, so height adjustment can only be done by pushing from the front and back. The specifications, such as the head of the mounting screws (pan head or oval head), length, and the shape of the springs, are constantly changing, so the same items cannot be provided.