This is an embroidered iron-on patch of a crown. m(_ _)m It is a beautiful and clean patch in light purple. Crown size: Approximately 7cm (height) x 10cm (width) *Iron-on adhesion is not possible on waterproof or water-repellent materials. 1. Temporary Adhesion Place a thin cloth such as a handkerchief or gauze over the material where you want to attach the patch to prevent damage. Iron over the patch. The key is to apply weight with medium heat for about 10 to 20 seconds. Be careful not to damage the material with heat and adjust the adhesion time accordingly. *Please be especially careful with thin polyester and nylon materials. They are sensitive to heat and may melt. The patch may peel off while it is still hot after ironing, so wait for it to cool down and check that the patch does not peel off. If it peels off, the adhesion is not yet complete, so increase the adhesion temperature and time. 2. Permanent Adhesion Iron from the back of the material where you want to attach the patch. Do not forget to use a cloth and apply weight to ensure firm adhesion. If the material is thinner than the patch, this step will allow heat to reach the film more directly, making iron-on adhesion more effective. *Iron-on adhesion is not a 100% permanent attachment method, so we recommend combining it with sewing. Although carefully made, there may be slight distortions or errors due to it being handmade. We appreciate your understanding of handmade items before purchasing. m(_ _)m Motif: Cross Parts: Patches, decorative materials