2x4 Adjusters - Set of 5 With scratch-prevention sheets Please comment for other quantities. These are DIY parts for erecting pillars by fixing 2x4 lumber to the top and bottom. You don't need complicated procedures or special tools just to set up the pillars. You can easily install them because they can be firmly fixed using the force of a jack. Inexpensive wooden adjusters Imitation and plagiarism are prohibited. Adjusters with only the upper part have existed before, but I thought about how to help those who don't have a drill or an 8mm drill, so I created the lower part. I came up with the drill-free type. DIY Storage Parts A washer has been added between the upper hexagon and the lumber. This addition provides stability and prevents loosening. Therefore, when assembling the upper part, insert the washer into the bolt before inserting it into the hole. Assembly Since it will be shipped disassembled, insert a washer into the bolt as shown in photo 3 and lightly tighten it (do not overtighten), then insert it, and put in the washer, nut, nut, and washer in that order, and tighten the upper part with a nut. Installation Method ① Cut the 2x4 lumber that will become the pillar to a height of approximately 80mm less than the installation location. ② Screw the lower part of the adjuster to the top of the 2x4 cut in ①. (Photo 4) ③ Insert the screw side of the upper adjuster into the hole in the pillar created in ②. ④ Once positioned in the installation location, stand it vertically (using a level), and you can tighten it by turning the lower nut clockwise with a wrench. 〇 Place the scratch-prevention sheet between the bottom of the pillar and the adjuster, sandwiching the floor and ceiling. It's easy to attach with double-sided tape. Tools Required 〇 13mm wrench or monkey wrench, etc., a tool to turn the nut 〇 Electric drill or impact driver or Phillips screwdriver 〇 Saw (can be cut at a home center) 〇 Level (there are also apps.) Drill not required Due to being handmade, there may be some variations. Painting is also possible, so please contact me. Any number of sets is possible. Please contact me. #Adjuster #CatTower #CatWalk #WallMountedTV #TensionWallStorage #Partition #TipOverPrevention #EscapePreventionFence