This is a Hama-ya (sacred arrow) stand that allows you to mount a Hama-ya on the wall at any angle. By gently bending the main body and passing the arrow through the two holes, the Hama-ya is secured by the restoring force of the body. ＜Patent and Design Registration Pending＞ How to fix the main body to the wall: ① Push pins (2 included) When attaching to a plasterboard wall, use the two push pins to insert into the small holes in the main body and fix it to the wall (see attached image). ② Double-sided tape (1 included: temporary adhesive gel tape: manufactured by Yamada Kagaku) Suitable wall surfaces: glass, tile, marble, acrylic, ABS resin, metal, wood Attach the included non-marking double-sided tape to the wide surface of the main body and stick it to the wall. * Depending on the compatibility with the wall, the adhesive strength may be weak, so please be careful to avoid damage in case of falling. ③ Wood screws (course thread) / nails When attaching to wooden parts such as pillars, insert wood screws or nails into the slightly larger holes in the main body and fix it to the wood. 【Contents】 　Main body: 1 piece, material: PP 　Push pins: 2 　Double-sided adhesive gel tape 【Size】 　Maximum: 210mm x 100mm 　Hole diameter: 34mm 　Please refer to the image. 【Notes】 ● If you bend it too strongly, it will lose its shape and will not be able to support the Hama-ya, so bend the main body slowly and insert the Hama-ya. ※ Please refrain from inquiries about the price.