Thank you for viewing this product. Please read the profile section before purchasing. This is a listing for [Mini 4WD Catcher Dampers]. ■ These are cut from Tamiya's genuine Mini 4WD Catcher, Black and Clear Green. They can be used without restrictions from daily practice to official Tamiya races. ■ 《NEW!》 Based on the highly acclaimed [typeF], developed with the cooperation of leading racers active in the Sendai/Tomiya area! With a double frame structure of main (C Green) and sub (Black) and the adoption of angle adjustment chips, a variety of settings are possible that cannot be achieved with a single cut-out product! -------------------- [Product Details] ＊ Overall Length → Main: approx. 61mm 　　　　　　　　 Sub: approx. 62mm ＊ Mounting hole center to catcher rear end 　→ Main: approx. 57mm 　　 Sub: approx. 58mm ＊ Ideal for the popular MS chassis (flex). ＊ Main only (image 4), sub only (image 5), main + sub (image 6) - versatile settings are possible to match the course layout! ＊ A new side frame is installed on the main to apply tension when combined with the sub! (Image 8) Main plate initial position can be maintained! ＊ Tension can be further adjusted using the included chips (please attach them to the sub plate with double-sided tape, etc. - see images 9, 10, 11) ＊ Weight mounting holes are not drilled. Please adjust the hole position and overall length to match your machine (image 12) ＊ The images are samples. Please note that the cut lines of the product you receive may differ slightly. ＊ Genuine catchers are used. Vertical creases may appear as in image 13, and the product's lettering and pressed patterns may appear randomly as in image 14. ＊ Available colors: [BK/BK] [RD/BK] [BL/BK] [C.G/BK] ＊ List of typeF only (including custom) is here ↓↓↓ #CatcherDamperTypeF -------------------- [Handmade by an individual.] There may be individual variations in size, cut lines, and hole positions. Please purchase only if you agree after confirming the images. Please ask if you have any questions. [Search Keywords] Tamiya mini4wd Mass Damper MS Chassis (Management No. 17)