This is a pre-clip tool for climbing. Length: 45.5cm - 3m There are two ways to use it: ① Hanging a quickdraw with the rope attached Hook the quickdraw with the carabiner gate open, and pulling down will close the gate. ② Hanging the rope on a pre-attached quickdraw With the rope wrapped around the gate, pulling one side of the rope will push the gate open and hook it. [Tips for Use] ・When lifting, the rope may slip due to its weight, so hold the rope (both sides) together with the pole. ・When hooking onto the gate, hold one side of the rope with the pole and pull the other rope with your other hand. ※ Can be used with both wire gate and key lock gate carabiners. ※ Quickdraws are not included.