Replacement drive for Sharp AQUOS Blu-ray recorder. Made in 2014. Disassembled, cleaned, and pickup lens cleaned, etc. Maintenance completed. Although the power-on time is slightly high, the actual usage time is short, and the operation is good. It can be used in most models, but some may not be compatible. If you open the top cover and find a drive of the same shape installed, it can basically be replaced. Compatible with BDR-L06 and L07 series. ※Cannot be used in BD drive-integrated TVs. Not compatible with BD-XL Vr.2.2. ✦BDR-L08SHB-XP is a high-performance drive that has renewed the fragile AQUOS BD drives of the past. It excels in both reading and writing, and can be used for a long time. When replacing a BD drive, it is recommended to replace it with the L08 series from 2013 onwards, rather than searching for the same model number as the one that broke down. (There are many cases where the L07 series fails regardless of usage time, only by power-on time. Some people say it is a defective product.) ●See image 3 for power-on time and usage time. ※May increase from the display for operation check. ●2 weeks operation guarantee after receiving evaluation ●Compatible models BD-W**, T**, S**, H**, HW**, and others (where ** are numbers) from 2011 and later ※Repair is at your own risk. We will provide support as much as possible, but please forgive any claims due to your own work errors. ▼How to replace ① Remove the two side screws and the three rear screws of the top cover. (Be careful not to remove the fan screws) ② Remove the top cover by sliding it backward, remove the four screws on the corners of the old drive, and take out the drive. Remove the SATA plug on the drive side that is connected. ③ When installing the new drive, follow the above steps in reverse. ※Depending on the model, it may be necessary to remove the front panel. ⚠Do not lose the screws. ※No price reduction However, multiple items can be discounted #TsukiboshiTech #TsukiboshiAQUOSRepairParts