# You can see all products from Sakura Miyabi Acrylic Boards ☆ ⚠️ As of December 8th, we cannot secure 1kg of 5mm boards with only one type, so even if you specify the thickness, other materials may be mixed in. 3mm boards are available. If you have a preference, we will prioritize those. ☘️ These are scraps of acrylic boards from our processing plant. ☘️ They are new, unused items with protective film attached. ☘️ We will pack as much as possible into a dedicated box (within the weight limit). ☘️ 【1mm / 1.5mm / 2mm / Rarely 4mm】 【3mm】 【5mm / Rarely 8, 10mm】 We have separated them into boxes for each thickness, so if you have a preference, please let us know after purchase. If you have no specific preference, we will put in the most abundant items first. ☘️ They are machine-cut, so the right angles are accurate. ⚠️ The short side is approximately 6cm or less for small scraps. The long side is 30cm or less. ⚠️ For 1-2mm boards, the short side is approximately 10cm or less. ⚠️ As they are cut-off scraps, most of them have not had their edges processed. ⚠️ Occasionally, there may be some with cracks, chips, or slight processing, or with holes (only 2 or 3 pieces at most). ⚠️ Due to weight restrictions, we do not use any special cushioning materials for packaging. We will simply put them directly into the box. ✅ With the Nekopos 1kg service, the amount that can be packed is small, so the contents will move around quite a bit in the box. ✅ With the Yu-packet Post 2kg service, we will pack as much as possible, and it will be around 1.8kg. We have a lot of stock, so please consult with us about shipping with other box sizes. Thank you.