# Low-Temperature Solder Stock Page This is a set for neatly removing leftover low-melting-point solder. ◆ Electronic Component Removal Set Set Contents: ・ Low-melting-point solder 10g ・ Solder wick ・ Flux paste 1ml ※ A soldering iron and ethanol or alcohol are required separately for removal. ※ Flux can also be used for attaching multi-pin components. ◇ Removal Method ※See image※ Example: PS5 controller ① Apply an appropriate amount of flux to the component's legs and heat with a soldering iron to spread. ② Apply low-melting-point solder and heat evenly. Remove the component when it becomes loose. ※ Please be careful not to force it off, as it may break. ③ Remove the solder remaining on the board with the solder wick. If it doesn't absorb well, add more flux. ④ Wipe off the remaining flux with anhydrous ethanol, etc. If it's difficult to clean, use a toothbrush. ※ Alcohol is also possible, but if it contains water, there is a risk of short-circuiting during power-up, so make sure to dry it thoroughly before applying power. Please perform the work at your own risk. ◇ Solder contains lead, so please handle it with care. Always wear a mask when working, and be sure to wash your hands and gargle after the work is finished. ◇ Since this transaction does not allow you to confirm the actual condition of the product, please review the images and description carefully before making a purchase. ◆ Shipping Method ◇ Shipped via Yu-Packet Post. We will ship within the shipping period (1-2 days), but please understand that it may be delayed due to work circumstances. ps4 ps5 pc switch xbox USB computer mouse Joystick analog Junk repair electronic components Solder D'arcy alloy lead bismuth