Thank you for viewing! I will create custom patch cables using the standard Canare GS-6 cable for guitars and basses, in your desired length. (Photo shows 20cm L-L) Solder uses Kester 44, and plugs are: ○ Tomoca Flat L-type (approx. 1.2cm thick) ○ Classic Pro S, L-type (both sides L-type, can be reversed) You can choose from these without any price change. Price: 1 cable: 980 yen 2 cables: 1680 yen 3 cables: 2380 yen 4 cables: 3080 yen 5 cables: 3680 yen The price is the same for lengths from 15cm to 30cm per cable (length between the metal connectors on both ends). Please inquire for lengths longer than that or for orders of 6 or more cables. I will create them according to your specifications, so please let me know the number of cables, length, and connector type/orientation in the comment section. For all connector types, I use heat shrink tubing on the hot terminal to prevent malfunctions, and also to seal the gap between the cable and the plug. The OFC wire provides outstanding durability, and the conductive vinyl inside the braided shield provides perfect noise protection. The cross-section of the core wire is wider than other manufacturers' cables, and when you check the sound quality, it produces a good guitar sound without excessive emphasis, as well as being durable. The outer diameter is 5.8mm and it's soft, making it easier to handle when building an effects board than Belden or Mogami cables. These are essentially unused, only tested for functionality. Shielded cables with the same specifications can also be made, please inquire. #gs-6