STETSBAR / ProII Stop Tail Nickel ステッツバー / プロ2 ストップテイル ニッケル ▫️ Guitar Bridge / Tremolo Unit ▫️ For Gibson Style ▫️ USA Imported STETSBAR is an innovative tremolo system that can be installed on a guitar body without modification. Roller bearings are used, allowing for smooth arm down and arm up action. This "Stop Tail" model is made for Gibson-style guitars such as Les Pauls. It can be installed directly on guitars with stop tailpieces and Tune-o-matic bridges, such as Les Pauls, SGs, ES-335s, and Flying Vs. Recommended for those who find Bigsby insufficient or are concerned about pitch stability. ※ Here is an easy-to-understand blog page, so I will paste the URL. https://world-9v.hatenadiary.org/entry/20140522/1400746714 【Included Items】 ・Main unit ・Arm ・Two types of hex wrenches ・Two types of screws for attaching to the guitar body (2 each) ・Cushion sponge ・Box ・Catalog 【Condition】 Cleaned. It was installed and used on a guitar for a while. There are some minor scratches and marks, but there is no noticeable damage, and it functions without any problems. The cushion sponge that goes between the guitar body and the unit has some slight tears. It seems usable as is, but if you are concerned, please use a separate sponge or cloth as a substitute. Please understand that the product evaluation is subjective. Please check the description and photos and purchase with the understanding that it is a used item. Please feel free to comment if you have any questions. 【Product Information】 ■ For models with stop tailpieces ■ Features ・ No drilling required for many Gibson-style models with stop tailpieces ・ Remove the bridge parts and install the Stetsbar to match the stop tailpiece anchor bolts ・ Smooth arm down/up is achieved with high-tech micro roller bearings and a specially designed bridge ■ String spacing: 10.4mm ■ Stud mounting hole center pitch: Approximately 82.5mm ■ Nickel