Thank you for viewing. This is a Headway HCF-500R all-solid wood (discontinued model). Thank you for viewing. This is a Headway HCF-500R all-solid wood (discontinued model). This is an exquisite all-solid wood model produced under the supervision of the late Mr. Momose, using carefully selected, top-quality materials! According to the catalog (see photos), the top is Engelmann spruce solid wood, the sides and back are rosewood solid wood, and the bridge and fingerboard are ebony. However, at a glance, the bridge and fingerboard appear to be rosewood. It has luxurious specifications, including a gorgeous head inlay, snowflake inlays, and a diamond volute (see photos). Although it was made in an overseas factory, the build quality is meticulous, as you can see in the photos, and it resonates like a true Headway. I purchased it used about a year ago, but the previous owner apparently removed the nut carelessly to cut grooves for lowering the string height, and the paint on the headstock was peeled off. The previous owner touched it up and made a new nut out of bone. There is also some clouding around the bushings of the tuning pegs on the headstock (see photos). The neck is straight. The string height is about 2.0mm at the 12th fret on the 6th string and about 1.75mm on the 1st string. These measurements are approximate, as they were taken by an amateur. The nut width is 43mm, and the scale length is 648mm. The frets are 80-90% remaining on the 1st to 3rd frets, and there are no buzzing or sticking issues. I am selling it because I am busy with work and don't have time to play the guitar. I think it's a good guitar, small and easy to play, with a wonderful tone. The neck is thin and easy to play. I hope someone who will cherish it will take it. This is a used item sold as is. No claims and no returns, please. Please understand that it may take some time to ship depending on the timing.