Unused, unopened, and in good condition. However, if you are concerned about minor scratches or dirt, please refrain from purchasing. Shipping will be via home delivery service, and we will use cushioning material to prevent damage during shipping. We apologize, but we cannot accept price negotiations. Thank you for your understanding. [Product Description (Quoted from Amazon)] Applications: Tightening work, inspection work, precision tightening work, etc. Torque capacity range Minimum~Maximum (cN·m): 30~300 Torque accuracy: ±3% Bit square width: 6.35mm Batteries used: 2 x AAA alkaline batteries Operating temperature range: 5~42°C Storage temperature range: -20~50°C Dimensions: Overall length 212mm x width 40mm x height 38.5mm Body weight: 150g Accessories: Driver bit set BTPM6S / Driver bits (+) [BT-P1, P2, P3] / Driver bits (-) [BT-M5.5, M6, M8] / Bit holder [BTB6] / Calibration certificate (with traceability system diagram) x 1 / Instruction manual x 1 / Resin case x 1 / 2 x AAA alkaline batteries A driver-type digital torque wrench that supports small torque management. Alerts you to the target torque with sound and light. This is a digital torque measuring instrument (driver type) that uses bits inserted into the tip holder. Over-torque prevention function equipped, the tolerance can be set within the range of 50% to 95% of the target torque, and when that tolerance is reached, a buzzer sound and red LED light will alert you to the tightening status. Supports both clockwise and counterclockwise rotation. Torque accuracy ±3%. Over-torque prevention function. Two measurement modes: peak mode and track mode. Tip replacement type, comes in a dedicated resin case.